3Techs home

J1 vs PolyPrinter 229 comparison

How the specs and price of J1 and PolyPrinter 229 differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (J1: 300 × 200 × 200 mm, PolyPrinter 229: 229 × 229 × 229 mm).
  • The listed price of J1 is $2,296 lower than that of PolyPrinter 229.
  • Minimum layer height is the same (J1: 0.05 mm, PolyPrinter 229: 0.05 mm).
  • J1 has the higher maximum print speed (J1: 350 mm/s, PolyPrinter 229: 250 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecJ1PolyPrinter 229
Manufacturer (values differ)SnapmakerPolyPrinter
Printing methodFused Filament FabricationFused Filament Fabrication
Price (values differ)$1,099$3,395
Printer dimensions (values differ)539 × 401 × 464mm406 × 635 × 457mm
Build area (values differ)300 × 200 × 200mm229 × 229 × 229mm
Weight (values differ)25kgNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 0.3mm0.05 ~ 0.25mm
Print speed (values differ)350mm/s250mm/s
Max nozzle temperature300℃300℃
Max build plate temperature (values differ)100℃125℃
Max chamber temperatureNot listedNot listed
Nozzle size (values differ)0.4mm0.35mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)100-240 V AC, 50/60 Hz, 4.4 A max.Normally 120V, selectable to 230V; max 5.0 A (fused)
AvailabilityDiscontinuedDiscontinued
DetailsView specsView specs

Other comparisons