J1 vs Kobra comparison
How the specs and price of J1 and Kobra differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (J1: 300 × 200 × 200 mm, Kobra: 220 × 220 × 250 mm).
- The listed price of Kobra is $800 lower than that of J1.
- Minimum layer height is the same (J1: 0.05 mm, Kobra: 0.05 mm).
- J1 has the higher maximum print speed (J1: 350 mm/s, Kobra: 180 mm/s).
- Kobra has the lower printer weight (J1: 25 kg, Kobra: 7 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | J1 | Kobra |
|---|---|---|
| Manufacturer (values differ) | Snapmaker | ANYCUBIC |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price (values differ) | $1,099 | $299 |
| Printer dimensions (values differ) | 539 × 401 × 464mm | 487 × 433 × 486mm |
| Build area (values differ) | 300 × 200 × 200mm | 220 × 220 × 250mm |
| Weight (values differ) | 25kg | 7kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height | 0.05 ~ 0.3mm | 0.05 ~ 0.3mm |
| Print speed (values differ) | 350mm/s | 180mm/s |
| Max nozzle temperature (values differ) | 300℃ | 260℃ |
| Max build plate temperature (values differ) | 100℃ | 110℃ |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size | 0.4mm | 0.4mm |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 100-240 V AC, 50/60 Hz, 4.4 A max. | 110 V / 220 V AC, 50 / 60 Hz |
| Availability | Discontinued | Discontinued |
| Details | View specs | View specs |