J1 vs UP300 comparison
How the specs of J1 and UP300 differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (J1: 300 × 200 × 200 mm, UP300: 205 × 255 × 225 mm).
- Minimum layer height is the same (J1: 0.05 mm, UP300: 0.05 mm).
- J1 has the lower printer weight (J1: 25 kg, UP300: 30 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | J1 | UP300 |
|---|---|---|
| Manufacturer (values differ) | Snapmaker | Tiertime |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price (values differ) | $1,099 | Price not listed |
| Printer dimensions (values differ) | 539 × 401 × 464mm | 500 × 460 × 523mm |
| Build area (values differ) | 300 × 200 × 200mm | 205 × 255 × 225mm |
| Weight (values differ) | 25kg | 30kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height (values differ) | 0.05 ~ 0.3mm | 0.05 ~ 0.4mm |
| Print speed (values differ) | 350mm/s | Not listed |
| Max nozzle temperature (values differ) | 300℃ | 299℃ |
| Max build plate temperature | 100℃ | 100℃ |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size (values differ) | 0.4mm | Not listed |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 100-240 V AC, 50/60 Hz, 4.4 A max. | 110-240VAC, 50-60Hz, 220W |
| Availability | Discontinued | Discontinued |
| Details | View specs | View specs |