J1 vs Mega SE comparison
How the specs and price of J1 and Mega SE differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (J1: 300 × 200 × 200 mm, Mega SE: 220 × 220 × 250 mm).
- The listed price of Mega SE is $800 lower than that of J1.
- J1 has the higher maximum print speed (J1: 350 mm/s, Mega SE: 100 mm/s).
- Mega SE has the lower printer weight (J1: 25 kg, Mega SE: 7 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | J1 | Mega SE |
|---|---|---|
| Manufacturer (values differ) | Snapmaker | ANYCUBIC |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price (values differ) | $1,099 | $299 |
| Printer dimensions (values differ) | 539 × 401 × 464mm | Not listed |
| Build area (values differ) | 300 × 200 × 200mm | 220 × 220 × 250mm |
| Weight (values differ) | 25kg | 7kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height (values differ) | 0.05 ~ 0.3mm | Not listed |
| Print speed (values differ) | 350mm/s | 100mm/s |
| Max nozzle temperature (values differ) | 300℃ | 255℃ |
| Max build plate temperature (values differ) | 100℃ | Not listed |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size | 0.4mm | 0.4mm |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 100-240 V AC, 50/60 Hz, 4.4 A max. | 100V/240V AC, 50/60Hz |
| Availability | Discontinued | Discontinued |
| Details | View specs | View specs |