3Techs home

IndoMake INFD-500 Pro vs Omni 7x comparison

How the specs of IndoMake INFD-500 Pro and Omni 7x differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (IndoMake INFD-500 Pro: 500 × 500 × 500 mm, Omni 7x: 500 × 500 × 500 mm).
  • Minimum layer height is the same (IndoMake INFD-500 Pro: 0.1 mm, Omni 7x: 0.1 mm).
  • IndoMake INFD-500 Pro has the higher maximum print speed (IndoMake INFD-500 Pro: 150 mm/s, Omni 7x: 50 mm/s).
  • IndoMake INFD-500 Pro has the lower printer weight (IndoMake INFD-500 Pro: 400 kg, Omni 7x: 650 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecIndoMake INFD-500 ProOmni 7x
Manufacturer (values differ)STPL3DOmni3D
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)1252 × 1232 × 1520mmNot listed
Build area500 × 500 × 500mm500 × 500 × 500mm
Weight (values differ)400kg650kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height0.1mm0.1mm
Print speed (values differ)150mm/s50mm/s
Max nozzle temperature (values differ)300℃500℃
Max build plate temperature (values differ)160℃100℃
Max chamber temperatureNot listedNot listed
Nozzle size (values differ)0.4mmNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)230 AC volts, 10A230 V / 50 Hz
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons