3Techs home

Alpha 500 vs Omni 7x comparison

How the specs of Alpha 500 and Omni 7x differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (Alpha 500: 500 × 500 × 500 mm, Omni 7x: 500 × 500 × 500 mm).
  • Alpha 500 has the smaller minimum layer height (Alpha 500: 0.08 mm, Omni 7x: 0.1 mm).
  • Alpha 500 has the higher maximum print speed (Alpha 500: 300 mm/s, Omni 7x: 50 mm/s).
  • Alpha 500 has the lower printer weight (Alpha 500: 80 kg, Omni 7x: 650 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecAlpha 500Omni 7x
Manufacturer (values differ)Divide By ZeroOmni3D
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)500 × 500 × 500mmNot listed
Build area500 × 500 × 500mm500 × 500 × 500mm
Weight (values differ)80kg650kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.08 ~ 0.2mm0.1mm
Print speed (values differ)300mm/s50mm/s
Max nozzle temperature (values differ)305℃500℃
Max build plate temperature (values differ)130℃100℃
Max chamber temperatureNot listedNot listed
Nozzle sizeNot listedNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)Single Phase, 220VAC, 30 A230 V / 50 Hz
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons