3Techs home

Sequoia vs D1000 Pro HS comparison

How the specs of Sequoia and D1000 Pro HS differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (Sequoia: 1200 × 1100 × 900 mm, D1000 Pro HS: 1050 × 1050 × 1050 mm).
  • D1000 Pro HS has the smaller minimum layer height (Sequoia: 0.1 mm, D1000 Pro HS: 0.05 mm).
  • D1000 Pro HS has the higher maximum print speed (Sequoia: 500 mm/s, D1000 Pro HS: 600 mm/s).
  • D1000 Pro HS has the lower printer weight (Sequoia: 1300 kg, D1000 Pro HS: 675 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecSequoiaD1000 Pro HS
Manufacturer (values differ)3ntrCreatBot
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)2297 × 1617 × 2319mmNot listed
Build area (values differ)1200 × 1100 × 900mm1050 × 1050 × 1050mm
Weight (values differ)1300kg675kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.1mm0.05mm
Print speed (values differ)500mm/s600mm/s
Max nozzle temperature (values differ)500℃420℃
Max build plate temperature (values differ)200℃120℃
Max chamber temperature (values differ)185℃80℃
Nozzle size (values differ)Not listed0.4mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)Three phase + neutral, 380V, 32A220~240 V, 50~60 Hz
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons