3Techs home

SLA 750 vs SP Series comparison

How the specs of SLA 750 and SP Series differ (both use Stereolithography).

日本語

Key differences

  • SLA 750 has the larger build size (printable volume), about 1.2x that of SP Series (SLA 750: 750 × 750 × 550 mm, SP Series: 800 × 800 × 400 mm).
  • Minimum layer height is the same (SLA 750: 0.05 mm, SP Series: 0.05 mm).
  • SLA 750 has the lower printer weight (SLA 750: 771 kg, SP Series: 1000 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecSLA 750SP Series
Manufacturer (values differ)3D SystemsPrismlab
Printing methodStereolithographyStereolithography
PricePrice not listedPrice not listed
Printer dimensions (values differ)1370 × 1539 × 2255mmNot listed
Build area (values differ)750 × 750 × 550mm800 × 800 × 400mm
Weight (values differ)771kg1000kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 0.15mm0.05 ~ 0.1mm
Print speedNot listedNot listed
Max nozzle temperatureNot listedNot listed
Max build plate temperatureNot listedNot listed
Max chamber temperatureNot listedNot listed
Nozzle sizeNot listedNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)200-240 VAC, 1- Ph, 50/60Hz, 24A200–240 VAC, 50/60 Hz, single phase, 10 A
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons