SLA350S vs IndoMake INSL-300 comparison
How the specs of SLA350S and IndoMake INSL-300 differ (both use Stereolithography).
Key differences
- SLA350S has the larger build size (printable volume), about 1.1x that of IndoMake INSL-300 (SLA350S: 350 × 250 × 350 mm, IndoMake INSL-300: 300 × 300 × 300 mm).
- Minimum layer height is the same (SLA350S: 0.1 mm, IndoMake INSL-300: 0.1 mm).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | SLA350S | IndoMake INSL-300 |
|---|---|---|
| Manufacturer (values differ) | ProtoFab | STPL3D |
| Printing method | Stereolithography | Stereolithography |
| Price | Price not listed | Price not listed |
| Printer dimensions (values differ) | 680 × 820 × 1820mm | 850 × 1150 × 1800mm |
| Build area (values differ) | 350 × 250 × 350mm | 300 × 300 × 300mm |
| Weight | Not listed | Not listed |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height | 0.1mm | 0.1mm |
| Print speed | Not listed | Not listed |
| Max nozzle temperature | Not listed | Not listed |
| Max build plate temperature | Not listed | Not listed |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size | Not listed | Not listed |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 200-240VAC 50/60Hz Single Phase 16A | 200 - 240 VAC | 50/60 Hz | 16 A (Available according to local voltage standard) |
| Availability | On sale | On sale |
| Details | View specs | View specs |