3Techs home

FF-600 vs FDM-T5060 comparison

How the specs of FF-600 and FDM-T5060 differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (FF-600: 500 × 500 × 600 mm, FDM-T5060: 500 × 500 × 600 mm).
  • FF-600 has the smaller minimum layer height (FF-600: 0.02 mm, FDM-T5060: 0.05 mm).
  • FDM-T5060 has the higher maximum print speed (FF-600: 70 mm/s, FDM-T5060: 500 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecFF-600FDM-T5060
Manufacturer (values differ)Fused FormKings 3D Printing
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)810 × 750 × 860mm680 × 730 × 1210mm
Build area500 × 500 × 600mm500 × 500 × 600mm
Weight (values differ)70kgNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.02mm0.05 ~ 0.35mm
Print speed (values differ)70mm/s500mm/s
Max nozzle temperature (values differ)Not listed320℃
Max build plate temperature (values differ)100℃Not listed
Max chamber temperatureNot listedNot listed
Nozzle size (values differ)Not listed0.4mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)Not listedAC100V-AC240V 50HZ/60HZ
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons