MP30 vs LINK EP-300 comparison
How the specs of MP30 and LINK EP-300 differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (MP30: 300 × 300 × 300 mm, LINK EP-300: 300 × 300 × 300 mm).
- Minimum layer height is the same (MP30: 0.05 mm, LINK EP-300: 0.05 mm).
- MP30 has the higher maximum print speed (MP30: 250 mm/s, LINK EP-300: 41.67 mm/s).
- MP30 has the lower printer weight (MP30: 40 kg, LINK EP-300: 250 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | MP30 | LINK EP-300 |
|---|---|---|
| Manufacturer (values differ) | MASS PORTAL | Lincsolution |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price | Price not listed | Price not listed |
| Printer dimensions (values differ) | 425 × 470 × 855mm | 1190 × 850 × 1525mm |
| Build area | 300 × 300 × 300mm | 300 × 300 × 300mm |
| Weight (values differ) | 40kg | 250kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height (values differ) | 0.05mm | 0.05 ~ 0.35mm |
| Print speed (values differ) | 250mm/s | 41.67mm/s |
| Max nozzle temperature (values differ) | 300℃ | 510℃ |
| Max build plate temperature (values differ) | 120℃ | Not listed |
| Max chamber temperature (values differ) | Not listed | 250℃ |
| Nozzle size | 0.4mm | 0.4mm |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | Not listed | 3-phase 4-wire, AC 380V 10kW |
| Availability (values differ) | Discontinued | On sale |
| Details | View specs | View specs |