Forge 1 vs MP30 comparison
How the specs of Forge 1 and MP30 differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (Forge 1: 300 × 300 × 300 mm, MP30: 300 × 300 × 300 mm).
- MP30 has the smaller minimum layer height (Forge 1: 0.1 mm, MP30: 0.05 mm).
- MP30 has the higher maximum print speed (Forge 1: 150 mm/s, MP30: 250 mm/s).
- MP30 has the lower printer weight (Forge 1: 75 kg, MP30: 40 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | Forge 1 | MP30 |
|---|---|---|
| Manufacturer (values differ) | Raise3D | MASS PORTAL |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price | Price not listed | Price not listed |
| Printer dimensions (values differ) | 620 × 626 × 1390mm | 425 × 470 × 855mm |
| Build area | 300 × 300 × 300mm | 300 × 300 × 300mm |
| Weight (values differ) | 75kg | 40kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height (values differ) | 0.1 ~ 0.25mm | 0.05mm |
| Print speed (values differ) | 30 ~ 150mm/s | 250mm/s |
| Max nozzle temperature | 300℃ | 300℃ |
| Max build plate temperature | 120℃ | 120℃ |
| Max chamber temperature (values differ) | 30℃ | Not listed |
| Nozzle size (values differ) | 0.4 / 0.6 / 0.8mm | 0.4mm |
| Filament diameter (values differ) | 1.75mm | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 100-240 V AC, 50/ 60 Hz 230 V @ 3.3 A | Not listed |
| Availability (values differ) | On sale | Discontinued |
| Details | View specs | View specs |