3Techs home

MP600 vs AD-F6 Pro comparison

How the specs of MP600 and AD-F6 Pro differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (MP600: 400 × 400 × 580 mm, AD-F6 Pro: 1200 × 800 × 100 mm).
  • MP600 has the smaller minimum layer height (MP600: 0.05 mm, AD-F6 Pro: 0.2 mm).
  • AD-F6 Pro has the higher maximum print speed (MP600: 250 mm/s, AD-F6 Pro: 300 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecMP600AD-F6 Pro
Manufacturer (values differ)MASS PORTALMingda
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)710 × 730 × 1810mm1600 × 1089 × 880mm
Build area (values differ)400 × 400 × 580mm1200 × 800 × 100mm
WeightNot listedNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05mm0.2 ~ 0.42mm
Print speed (values differ)250mm/s300mm/s
Max nozzle temperature (values differ)475℃300℃
Max build plate temperature (values differ)120℃80℃
Max chamber temperature (values differ)80℃Not listed
Nozzle size (values differ)0.4mm0.6mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)Not listed220V
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons