3Techs home

MP1200 vs FDM-6610D comparison

How the specs of MP1200 and FDM-6610D differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (MP1200: 600 × 600 × 1000 mm, FDM-6610D: 600 × 600 × 1000 mm).
  • Minimum layer height is the same (MP1200: 0.05 mm, FDM-6610D: 0.05 mm).
  • FDM-6610D has the higher maximum print speed (MP1200: 250 mm/s, FDM-6610D: 300 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecMP1200FDM-6610D
Manufacturer (values differ)MASS PORTALKings 3D Printing
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)880 × 844 × 2100mm930 × 1200 × 1670mm
Build area600 × 600 × 1000mm600 × 600 × 1000mm
WeightNot listedNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05mm0.05 ~ 0.3mm
Print speed (values differ)250mm/s300mm/s
Max nozzle temperature (values differ)475℃320℃
Max build plate temperature (values differ)120℃Not listed
Max chamber temperature (values differ)80℃Not listed
Nozzle size (values differ)0.8mm0.4mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)Not listedAC100V-AC240V 50HZ/60HZ
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons