3Techs home

I65X vs F3300 comparison

How the specs of I65X and F3300 differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (I65X: 600 × 490 × 1000 mm, F3300: 600 × 600 × 800 mm).
  • I65X has the smaller minimum layer height (I65X: 0.05 mm, F3300: 0.188 mm).
  • I65X has the lower printer weight (I65X: 220 kg, F3300: 1360 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecI65XF3300
Manufacturer (values differ)CR-3DStratasys
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)1100 × 800 × 1500mm2032 × 1626 × 2362mm
Build area (values differ)600 × 490 × 1000mm600 × 600 × 800mm
Weight (values differ)220kg1360kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 1mm0.188 ~ 0.5mm
Print speedNot listedNot listed
Max nozzle temperature (values differ)350℃Not listed
Max build plate temperature (values differ)110℃Not listed
Max chamber temperature (values differ)60℃Not listed
Nozzle size (values differ)0.6mmNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)Not listed208V, 3 PH, 30A dedicated circuit, 50/60 Hz, 5-wire (L-L-L-N-G)
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons