3Techs home

ADMAFLEX 130 Evolution vs P4K comparison

How the specs of ADMAFLEX 130 Evolution and P4K differ (both use Digital Light Processing).

日本語

Key differences

  • ADMAFLEX 130 Evolution has the larger build size (printable volume), about 1.1x that of P4K (ADMAFLEX 130 Evolution: 160 × 100 × 400 mm, P4K: 233 × 141.5 × 180 mm).
  • ADMAFLEX 130 Evolution has the smaller minimum layer height (ADMAFLEX 130 Evolution: 0.01 mm, P4K: 0.025 mm).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecADMAFLEX 130 EvolutionP4K
Manufacturer (values differ)AdmatecETEC
Printing methodDigital Light ProcessingDigital Light Processing
PricePrice not listedPrice not listed
Printer dimensions (values differ)980 × 670 × 1880mm730 × 480 × 1600mm
Build area (values differ)160 × 100 × 400mm233 × 141.5 × 180mm
Weight (values differ)300kgNot listed
Resolution (XY) (values differ)62.5μm90μm
Resolution (Z)Not listedNot listed
Layer height (values differ)0.01 ~ 0.2mm0.025 ~ 0.15mm
Print speedNot listedNot listed
Max nozzle temperatureNot listedNot listed
Max build plate temperatureNot listedNot listed
Max chamber temperatureNot listedNot listed
Nozzle sizeNot listedNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)110 / 230 V 6 AClean, single-phase 100-120 volts AC line at 5.4 amps or 220-240 volts AC at 2.4 amps grounded directly
Availability (values differ)On saleDiscontinued
DetailsView specsView specs

Other comparisons