E2 vs DeltiQ 2 comparison
How the specs of E2 and DeltiQ 2 differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (E2: 330 × 240 × 240 mm, DeltiQ 2: 250 × 250 × 300 mm).
- DeltiQ 2 has the smaller minimum layer height (E2: 0.1 mm, DeltiQ 2: 0.05 mm).
- DeltiQ 2 has the lower printer weight (E2: 35.1 kg, DeltiQ 2: 10 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | E2 | DeltiQ 2 |
|---|---|---|
| Manufacturer (values differ) | Raise3D | TRILAB |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price (values differ) | $2,999 | Price not listed |
| Printer dimensions (values differ) | 607 × 596 × 465mm | 410 × 500 × 810mm |
| Build area (values differ) | 330 × 240 × 240mm | 250 × 250 × 300mm |
| Weight (values differ) | 35.1kg | 10kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) (values differ) | Not listed | 50μm |
| Layer height (values differ) | 0.1 ~ 0.5mm | 0.05mm |
| Print speed (values differ) | 30 ~ 150mm/s | Not listed |
| Max nozzle temperature | 300℃ | 300℃ |
| Max build plate temperature (values differ) | 110℃ | 105℃ |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size (values differ) | 0.4 / 0.4 / 0.6 / 0.8mm | 0.4mm |
| Filament diameter | 1.75mm | 1.75mm |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 100-240 V AC, 50/ 60 Hz | Input 100-240 V, Output 24 V, 250 W |
| Availability | Discontinued | Discontinued |
| Details | View specs | View specs |