3Techs home

Guider 3 Plus vs FDM-TW445 comparison

How the specs of Guider 3 Plus and FDM-TW445 differ (both use Fused Filament Fabrication).

日本語

Key differences

  • FDM-TW445 has the larger build size (printable volume), about 1.1x that of Guider 3 Plus (Guider 3 Plus: 350 × 350 × 600 mm, FDM-TW445: 400 × 400 × 500 mm).
  • Minimum layer height is the same (Guider 3 Plus: 0.05 mm, FDM-TW445: 0.05 mm).
  • FDM-TW445 has the higher maximum print speed (Guider 3 Plus: 250 mm/s, FDM-TW445: 500 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecGuider 3 PlusFDM-TW445
Manufacturer (values differ)FlashForgeKings 3D Printing
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)635 × 550 × 1070mm580 × 550 × 920mm
Build area (values differ)350 × 350 × 600mm400 × 400 × 500mm
Weight (values differ)70kgNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 0.4mm0.05 ~ 0.35mm
Print speed (values differ)10 ~ 250mm/s500mm/s
Max nozzle temperature320℃320℃
Max build plate temperature (values differ)120℃Not listed
Max chamber temperatureNot listedNot listed
Nozzle size (values differ)0.4 / 0.6 / 0.8mm0.4mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)AC100-240V / DC24V / 6.25A, 650WAC100V-AC240V 50HZ/60HZ
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons