3Techs home

IPSO 105 vs Raptor 450 comparison

How the specs of IPSO 105 and Raptor 450 differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (IPSO 105: 400 × 600 × 440 mm, Raptor 450: 450 × 450 × 500 mm).
  • IPSO 105 has the smaller minimum layer height (IPSO 105: 0.15 mm, Raptor 450: 0.16 mm).
  • IPSO 105 has the higher maximum print speed (IPSO 105: 400 mm/s, Raptor 450: 300 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecIPSO 105Raptor 450
Manufacturer (values differ)BigRepMingda
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)990 × 1150 × 1740mmNot listed
Build area (values differ)400 × 600 × 440mm450 × 450 × 500mm
Weight (values differ)400kgNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.15mm0.16 ~ 0.24mm
Print speed (values differ)400mm/s300mm/s
Max nozzle temperature (values differ)450℃500℃
Max build plate temperature (values differ)140℃130℃
Max chamber temperature (values differ)100℃120℃
Nozzle size (values differ)Not listed0.4mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)L1 / N (L2) / PE, 208–240 V, 16 A, 50/60 Hz220V
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons