3Techs home

MP01 vs G3X comparison

How the specs of MP01 and G3X differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (MP01: 400 × 400 × 400 mm, G3X: 400 × 400 × 400 mm).
  • Minimum layer height is the same (MP01: 0.05 mm, G3X: 0.05 mm).
  • MP01 has the higher maximum print speed (MP01: 700 mm/s, G3X: 120 mm/s).
  • MP01 has the lower printer weight (MP01: 25.9 kg, G3X: 360 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecMP01G3X
Manufacturer (values differ)PiocreatGIMAX3D
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)649 × 721 × 850mm900 × 900 × 1800mm
Build area400 × 400 × 400mm400 × 400 × 400mm
Weight (values differ)25.9kg360kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 0.3mm0.05mm
Print speed (values differ)700mm/s120mm/s
Max nozzle temperature (values differ)300℃320℃
Max build plate temperature (values differ)100℃120℃
Max chamber temperature (values differ)Not listed70℃
Nozzle size (values differ)0.4mmNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)100-240V~AC 50/60 Hz240V AC 50/60 HZ
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons