3Techs home

MS01 vs MS01 SE comparison

How the specs of MS01 and MS01 SE differ (both use Fused Granulate Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (MS01: 500 × 500 × 650 mm, MS01 SE: 500 × 500 × 650 mm).
  • MS01 SE has the smaller minimum layer height (MS01: 0.5 mm, MS01 SE: 0.2 mm).
  • MS01 has the higher maximum print speed (MS01: 220 mm/s, MS01 SE: 100 mm/s).
  • MS01 SE has the lower printer weight (MS01: 274 kg, MS01 SE: 260 kg).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecMS01MS01 SE
ManufacturerPiocreatPiocreat
Printing methodFused Granulate FabricationFused Granulate Fabrication
PricePrice not listedPrice not listed
Printer dimensions (values differ)Not listed1110 × 970 × 1595mm
Build area500 × 500 × 650mm500 × 500 × 650mm
Weight (values differ)274kg260kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.5 ~ 1.5mm0.2 ~ 1.5mm
Print speed (values differ)220mm/s100mm/s
Max nozzle temperature400℃400℃
Max build plate temperature (values differ)110℃120℃
Max chamber temperature (values differ)100℃Not listed
Nozzle size (values differ)1mm3mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)100-120V~,200-240V~,50/60Hz100-240V~,50/60Hz
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons