3Techs home

FDM-K1000 vs MD-1000D Ultra comparison

How the specs of FDM-K1000 and MD-1000D Ultra differ (both use Fused Filament Fabrication).

日本語

Key differences

  • Build size (printable volume) is about the same (FDM-K1000: 1000 × 1000 × 1000 mm, MD-1000D Ultra: 1000 × 1000 × 1000 mm).
  • FDM-K1000 has the smaller minimum layer height (FDM-K1000: 0.05 mm, MD-1000D Ultra: 0.3 mm).
  • FDM-K1000 has the higher maximum print speed (FDM-K1000: 500 mm/s, MD-1000D Ultra: 300 mm/s).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecFDM-K1000MD-1000D Ultra
Manufacturer (values differ)Kings 3D PrintingMingda
Printing methodFused Filament FabricationFused Filament Fabrication
PricePrice not listedPrice not listed
Printer dimensionsNot listedNot listed
Build area1000 × 1000 × 1000mm1000 × 1000 × 1000mm
WeightNot listedNot listed
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 0.6mm0.3 ~ 0.36mm
Print speed (values differ)500mm/s300mm/s
Max nozzle temperature (values differ)300℃350℃
Max build plate temperature (values differ)100℃110℃
Max chamber temperature (values differ)Not listed45℃
Nozzle size (values differ)Not listed0.6mm
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)AC100V-AC240V/15A 50Hz/60Hz220V 50/60Hz
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons