3Techs home

SLA600 vs XCELL 900S comparison

How the specs of SLA600 and XCELL 900S differ (both use Stereolithography).

日本語

Key differences

  • Build size (printable volume) is about the same (SLA600: 600 × 600 × 400 mm, XCELL 900S: 900 × 300 × 550 mm).
  • XCELL 900S has the smaller minimum layer height (SLA600: 0.05 mm, XCELL 900S: 0.01 mm).

Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.

Spec comparison table

Values differ
SpecSLA600XCELL 900S
Manufacturer (values differ)ProtoFabDWS
Printing methodStereolithographyStereolithography
PricePrice not listedPrice not listed
Printer dimensions (values differ)1630 × 1280 × 1920mm2100 × 860 × 2450mm
Build area (values differ)600 × 600 × 400mm900 × 300 × 550mm
Weight (values differ)Not listed1200kg
Resolution (XY)Not listedNot listed
Resolution (Z)Not listedNot listed
Layer height (values differ)0.05 ~ 0.2mm0.01 ~ 0.2mm
Print speedNot listedNot listed
Max nozzle temperatureNot listedNot listed
Max build plate temperatureNot listedNot listed
Max chamber temperatureNot listedNot listed
Nozzle sizeNot listedNot listed
Filament diameterNot listedNot listed
Light wavelengthNot listedNot listed
Power supply (values differ)200-240 VAC, 50/60 Hz, Single Phase, 16 AAC 230/115 V / 50-60 Hz
AvailabilityOn saleOn sale
DetailsView specsView specs

Other comparisons