X400 vs DE comparison
How the specs of X400 and DE differ (both use Fused Filament Fabrication).
Key differences
- DE has the larger build size (printable volume), about 1.1x that of X400 (X400: 355 × 305 × 305 mm, DE: 400 × 300 × 300 mm).
- Minimum layer height is the same (X400: 0.04 mm, DE: 0.04 mm).
- X400 has the higher maximum print speed (X400: 250 mm/s, DE: 120 mm/s).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | X400 | DE |
|---|---|---|
| Manufacturer (values differ) | 3D Labs | CreatBot |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price (values differ) | $9,999 | Price not listed |
| Printer dimensions (values differ) | Not listed | 590 × 430 × 570mm |
| Build area (values differ) | 355 × 305 × 305mm | 400 × 300 × 300mm |
| Weight (values differ) | Not listed | 45kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height | 0.04mm | 0.04mm |
| Print speed (values differ) | 250mm/s | 120mm/s |
| Max nozzle temperature (values differ) | 425℃ | 350℃ |
| Max build plate temperature (values differ) | 210℃ | 100℃ |
| Max chamber temperature (values differ) | 90℃ | Not listed |
| Nozzle size | 0.4mm | 0.4mm |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 20amp 110v circuit highly recommended. 2200 watt peak draw (non-continuous). Continuous draw is approximately 500-1000 watts depending on heat settings. | 110/220V |
| Availability | Discontinued | Discontinued |
| Details | View specs | View specs |