TIPUS 3D vs DX Plus comparison
How the specs of TIPUS 3D and DX Plus differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (TIPUS 3D: 400 × 240 × 400 mm, DX Plus: 300 × 250 × 520 mm).
- DX Plus has the smaller minimum layer height (TIPUS 3D: 0.08 mm, DX Plus: 0.04 mm).
- DX Plus has the higher maximum print speed (TIPUS 3D: 80 mm/s, DX Plus: 120 mm/s).
- DX Plus has the lower printer weight (TIPUS 3D: 52 kg, DX Plus: 40 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | TIPUS 3D | DX Plus |
|---|---|---|
| Manufacturer (values differ) | AROJA XORFEX | CreatBot |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price | Price not listed | Price not listed |
| Printer dimensions (values differ) | 680 × 570 × 720mm | 420 × 380 × 790mm |
| Build area (values differ) | 400 × 240 × 400mm | 300 × 250 × 520mm |
| Weight (values differ) | 52kg | 40kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height (values differ) | 0.08 ~ 0.3mm | 0.04mm |
| Print speed (values differ) | 80mm/s | 120mm/s |
| Max nozzle temperature (values differ) | 280℃ | 350℃ |
| Max build plate temperature (values differ) | 105℃ | 100℃ |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size (values differ) | Not listed | 0.4mm |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 240V 50/60 hz (110V) - one phase | 110/220V |
| Availability | On sale | On sale |
| Details | View specs | View specs |