System 30M vs Omni200 comparison
How the specs of System 30M and Omni200 differ (both use Fused Filament Fabrication).
Key differences
- Build size (printable volume) is about the same (System 30M: 200 × 200 × 200 mm, Omni200: 200 × 200 × 200 mm).
- Omni200 has the higher maximum print speed (System 30M: 30 mm/s, Omni200: 100 mm/s).
- Omni200 has the lower printer weight (System 30M: 36 kg, Omni200: 30 kg).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | System 30M | Omni200 |
|---|---|---|
| Manufacturer (values differ) | Hyrel 3D | Omni3D |
| Printing method | Fused Filament Fabrication | Fused Filament Fabrication |
| Price | Price not listed | Price not listed |
| Printer dimensions (values differ) | 870 × 410 × 820mm | 530 × 530 × 650mm |
| Build area | 200 × 200 × 200mm | 200 × 200 × 200mm |
| Weight (values differ) | 36kg | 30kg |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height | Not listed | Not listed |
| Print speed (values differ) | 30mm/s | 100mm/s |
| Max nozzle temperature (values differ) | 450℃ | 260℃ |
| Max build plate temperature (values differ) | 90℃ | 120℃ |
| Max chamber temperature (values differ) | 55℃ | 50℃ |
| Nozzle size | Not listed | Not listed |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 15 A / 110-120 VAC / 60 Hz or 8 A / 208-240 VAC (single phase) / 50-60 Hz | Not listed |
| Availability | On sale | On sale |
| Details | View specs | View specs |