IndoMake INSL-600 vs SLA600 comparison
How the specs of IndoMake INSL-600 and SLA600 differ (both use Stereolithography).
Key differences
- Build size (printable volume) is about the same (IndoMake INSL-600: 600 × 600 × 400 mm, SLA600: 600 × 600 × 400 mm).
- IndoMake INSL-600 has the smaller minimum layer height (IndoMake INSL-600: 0.06 mm, SLA600: 0.1 mm).
Summarized automatically from listed data. Prices are reference prices in US dollars at the time of listing and are not converted from other currencies. Which one suits you depends on the size of what you want to print, your use and your budget.
Spec comparison table
Values differ
| Spec | IndoMake INSL-600 | SLA600 |
|---|---|---|
| Manufacturer (values differ) | STPL3D | ProtoFab |
| Printing method | Stereolithography | Stereolithography |
| Price | Price not listed | Price not listed |
| Printer dimensions (values differ) | 1150 × 1600 × 1950mm | 1630 × 1280 × 1920mm |
| Build area | 600 × 600 × 400mm | 600 × 600 × 400mm |
| Weight (values differ) | 1200kg | Not listed |
| Resolution (XY) | Not listed | Not listed |
| Resolution (Z) | Not listed | Not listed |
| Layer height (values differ) | 0.06 ~ 0.16mm | 0.1mm |
| Print speed | Not listed | Not listed |
| Max nozzle temperature | Not listed | Not listed |
| Max build plate temperature | Not listed | Not listed |
| Max chamber temperature | Not listed | Not listed |
| Nozzle size | Not listed | Not listed |
| Filament diameter | Not listed | Not listed |
| Light wavelength | Not listed | Not listed |
| Power supply (values differ) | 200 - 240 VAC | 50/60 Hz | 10 A | 200-240 VAC, 50/60 Hz, Single Phase, 16 A |
| Availability | On sale | On sale |
| Details | View specs | View specs |